Important: Do not start the installation process unless you fully understand it.

Before you begin to install your wall dimmer, please make sure you read the instructions on the box as well as the user guide that came inside the box.

You will need the following tools in order to successfully complete this installation:

• Phillips and flat head screwdrivers
• Electrical tester
• Pliers

Once you have all the tools you need, you will also need to locate and have access to your breaker panel so that you can turn off power while you are working.

Need help? Please consult our team if you have any additional questions.

Warning: Most electrical accidents are caused by carelessness or ignorance. If you combine a basic knowledge of electricity, a healthy respect for it, and a dose of common sense, you can safely tackle many household electrical repairs.

Failure to follow these procedures could result in property damages, serious injury or death.

Before working on an electrical circuit, make sure that the electricity is turned off from your circuit breaker panel. Tape a sign to the panel warning others to leave it turned off until you have finished your work.

Before touching any wires, use a voltage tester to make sure the wires are not live.

Make sure you have enough light in order to see what you are doing. Do not work in the dark or with inadequate lighting.

If you are not sure about your wiring or do not feel comfortable installing the device yourself, please consult a qualified electrician.

Do not install this device in order to control a receptacle, motor-operated appliances, fluorescent lighting fixture, or a transformer-supplied appliance.

This device is not to be used with emergency exit fixtures, photocells and electronic timers.

Do not use where directly exposed to water.

Do not alter the device.

Yes. A neutral wire is required (present in most U.S. homes built after 1978). Neutral wires deliver a small amount of power to the smart switch so it can stay connected to your Wi-Fi, even when it's turned off.

Please consult a certified electrician if you are not sure of your current wiring.

The user guide is included in the retail box. Additionally, you can download a PDF copy of the smart dimmer user guide.

First, please make sure that you have the latest version of the Amazon Alexa app on your device.

After have successfully installed the smart dimmer switch, you can add it to your Alexa app by following the steps below:

1. Make sure your device is powered on.
2. Open the Alexa app
3. Tap the Devices icon
4. Select the + icon on the top right-hand side
5. Select Add Device,
6. Select Switch
7. Select Finesse Decor from the list of brands

Follow the instructions on your screen to complete the installation.

Note: Once the device is connected and powered on, it enters pairing mode for 5 minutes. If you miss this 5-minute window, you can turn the device OFF and ON again or perform a factory reset.

Alexa routines are schedules you pre-set with your Alexa or mobile device. When they are paired with the Finesse Dimming Switch, you can turn on your lights at a certain time, turn them off at another one, and create routines for your lights that work with your lifestyle.

Unfortunately no, this is an LED LV dimmer that works with certain chandeliers. Please take a look at our compatible chandeliers.

Single Pole refers to one dimming switch that controls one light. 3-way is done when you need more than one switch to control the same light.

Yes. Using your Alexa app, you can connect the device to your 2.4 GHz Wi-Fi.

The Finesse Decor Smart Dimmer Switch is intended to be used as a wall switch and dimmer to control LED, incandescent, CFL bulbs, and integrated LED fixtures.

It is intended to replace a standard switch receptacle.

It can be connected and controlled through a WI-FI connection with the Amazon Alexa app or other external Alexa built-in devices.

• Intended for indoor use only
• intended for household use only

With this dimmer you will be able to:

• Replace your existent dimmer and have a smart dimmer at your home or office
• Manually or remotely control your dimmer
• Control your lights via the Alexa app or other Amazon devices
• Pair with Amazon echo to control your dimmer via voice commands
• Set schedules and control your dimmer from anywhere

• Dimmer Type: Single pole + 3-way
• Dimming Method: Triac Dimming
• Wiring: Wire to wire connection. Neutral wire is required.
• Rated input voltage: 120 VAC / 60 Hz
• Output Voltage: 108-132 VAC
• Maximum Load: LED 150 W - Incandescent: 450 W
• Standby Power< 0.5 W
• Startup Time <1 second
• Wireless control module
  Wi-Fi 2.4 GHz, iEEE802.11 b/g/n
• Bluetooth low energy
• BLE only pairing for phone and device

Please see the user guide.

Press and hold the on/off switch for 10 seconds; release the switch once you see the status indicator blinking green and red; once the indicator blinks green only, reset is complete and the switch is ready to set up.

The Finesse Decor Smart Dimmer is warranted for one year from the date of purchase.

• Press and hold the on/off button for 10 seconds, then release when the status indicator blinks green and red.
• When the indicator blinks green, reset is compalte and the dimmer is ready to set up.

Please contact us and we will do our best to help. It is highly recommended that you hire a certified electrician if you are not familiar with installing electrical devices or electrical outlets.